Ok...so after initial issue....upload of pics has worked. Unfortunately the close-ups really bring out the grainy texture of 3D printed models....any suggestions?
Last edited by Devorsine; 11-18-2019 at 01:06.
If you use 3d printed models you really need a good sealant, there are a number of sealants others have used, plenty of threads on this forum.
Personally I use a matt acrylic varnish and put around 4 or 5 coats before undercoating then painting.
Hi there,
Many, many thanks for the advise!!!
Nice Albatri!
Thanks for posting the photos.
I laugh in the face of danger - then I hide until it goes away!
Awesome.... thank you for your advise!
Bookmarks