Results 1 to 10 of 10

Thread: VALOM kit recommendations

  1. #1

    Default VALOM kit recommendations

    Hello fellow modelers, I am arguably putting my sanity at risk as I go down this road, but I would like to know which VALOM kits you would recommend trying one's hand at?

  2. #2

    Karo7's Avatar
    Users Country Flag


    Name
    Florian
    Location
    Baden-Württemberg
    Sorties Flown
    325
    Join Date
    Sep 2018

    Default

    I would suggest the Fokker Dr.I. Two of the wings are integrated in the fuselage (no single wing construction) and it has the easiest struts assembly.

  3. #3

    Default

    The Fokker D.VII has one-piece 'N-struts' which make the wing assembly much easier (automatic stagger!) than all the multiple-single-strut types like the Pup, Camel and SE5a.
    I have built 4 with no problems at all.
    I'll be trying a couple of Fokker Dr.1s shortly.
    I laugh in the face of danger - then I hide until it goes away!

  4. #4

    Default

    I have built eight Valom kits - Fokker EIII, Dr 1 & DVII, Albatros DV, Sopwith Pup, Nieuport 11 & 17 and SE5a. Each Valom kit seems to have its unique tricky bit, but I'd agree that the Fokker VII and Dr 1 are the easier ones - or at least slightly easier.

    I find the Fokker EIII more difficult since its single wing is in two parts with the smallest pegs & holes to guide placement. The tail is in three pieces - 1 vertical and 2 horizontal (left & right) with hardly anything to guide placement and not much area for contract on the end of the fuselage. I nearly threw my first ones against the wall but I have built several since then.

  5. #5

    Karo7's Avatar
    Users Country Flag


    Name
    Florian
    Location
    Baden-Württemberg
    Sorties Flown
    325
    Join Date
    Sep 2018

    Default

    Jeremy, get sure to take a duel set. You get four planes with all decal options of the double sets (dual combo?) and the price is almost the same. I don't know how much the shipping to the US is, but in Europe, ordering directly at Valom is the cheapest option.

    I agree, that the DVII is also an easy Valom kit, but the struts on the Dr.I are definitely the most easy to assemble of all Valom kits. As mentioned above, you start with mounting the under and middle wing to the fuselage. Than you put the two main struts through the middle wing and clue them on the under wing. So the struts are fixed and the top wing can easily be assembled. At last you have only to clue the triangle struts between top wing and fuselage and you are done.

    A disadvantage of the Dr.I is the resin engine. You have to cut off one peg and file the other peg, to get the part in the cowling.

    I suggest to avoid the Valom cockpits at all - it can't be seen afterwards and is not appropriate for a wargaming miniature. Put a pilot miniature in the hole. Also avoid the thin etched tail skid and use a stable instead, which you can glue in the fuselage after drilling a small hole into.

  6. #6

    Default

    Great info, thank you! I'll definitely be looking at the Fokker D.VII's and Dr.I's then.

    It's hard to find any builds for these online, especially by modelers who actually explain what they did. I did notice people replacing the rear skids with bits of paperclips in their build logs, just as you suggested Florian. I'm assuming that I find pilots on Shapeways? Do you recommend replacing any of the guns or other parts?

    What do you all think of the Albatros D.V or the two-seaters? I don't think that I have found one pic of an F.2b build.

  7. #7

    Karo7's Avatar
    Users Country Flag


    Name
    Florian
    Location
    Baden-Württemberg
    Sorties Flown
    325
    Join Date
    Sep 2018

    Default

    Quote Originally Posted by VonSquid View Post
    Great info, thank you! I'll definitely be looking at the Fokker D.VII's and Dr.I's then.

    It's hard to find any builds for these online, especially by modelers who actually explain what they did. I did notice people replacing the rear skids with bits of paperclips in their build logs, just as you suggested Florian. I'm assuming that I find pilots on Shapeways? Do you recommend replacing any of the guns or other parts?

    What do you all think of the Albatros D.V or the two-seaters? I don't think that I have found one pic of an F.2b build.
    Personally I like to stay as near as possible to the WoG design. So I scratch build the pilot out of sprue and use the Valom machine guns.

    The D.V is also an easy build, comparable with the D.VII. The cooler pipe from the cylinders to the top wing and the gaps on the elevator are the crunchpoints of that kit.

    I have never build a two-seater, because I have enough (?) of the two models by WoG.

  8. #8

    Default

    Florian: I just saw your technique for making pilots on your SE.5a build. That is a nice build log! There is a lot of good and useful information in there. The kit came out quite nicely as well

    I may add the D.V to my first purchase as well, although I'm still on the fence about the F.2b and Rumpler kits.

    I'm guessing that the Nieuports will be next in difficulty to the E.III?

  9. #9

    Karo7's Avatar
    Users Country Flag


    Name
    Florian
    Location
    Baden-Württemberg
    Sorties Flown
    325
    Join Date
    Sep 2018

    Default

    Quote Originally Posted by VonSquid View Post
    Florian: I just saw your technique for making pilots on your SE.5a build. That is a nice build log! There is a lot of good and useful information in there. The kit came out quite nicely as well

    I may add the D.V to my first purchase as well, although I'm still on the fence about the F.2b and Rumpler kits.

    I'm guessing that the Nieuports will be next in difficulty to the E.III?
    Yes, the Nieuport 11 has also a single (under) wing construction, and they are even more difficult than the E.III ones. Additionally there is the etched machine gun on the top wing. The Nieuport 17 is easier: no single wings, the easy to assemble V-struts and only an optional top machine gun.

  10. #10

    Default

    Outstanding, thank you!



Similar Missions

  1. WSF Recommendations on which designer for...
    By Dawn Patrol in forum Shapeways Models
    Replies: 14
    Last Post: 01-17-2018, 11:52
  2. RAF color recommendations
    By BB401 in forum Colors and Markings
    Replies: 4
    Last Post: 12-11-2017, 17:08
  3. Valom Kits - Request for recommendations for replacement of Struts
    By Nicola Zee in forum Metal and Resin Models
    Replies: 14
    Last Post: 11-19-2014, 13:11
  4. Purchase Recommendations
    By Dun Diddly D. in forum UK Wing
    Replies: 15
    Last Post: 04-24-2012, 01:48
  5. Recommendations for Two-Seaters
    By Dwarflord22 in forum WGF: General Discussions
    Replies: 5
    Last Post: 08-18-2011, 09:01

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •