Page 2 of 2 FirstFirst 12
Results 51 to 91 of 91

Thread: November 2019 Workbench

  1. #51

    Default

    Looks excellent Robert. Love the bullet holes.

  2. #52

    Default

    Dave, you sure get a lot done while under MO restrictions...
    Great work on Hunter’s Shapeways.

    Robert, That Snoopy looks perfect.

  3. #53

    Default

    Again everything looks great, have a couple of Shapeways E III's myself.

    Now for my weekly Jap group (should finish this up as he gave me Marines tonight). And a couple of my Black Seas ships half done, still need rigging and sails. Figured a few Brigs and a 74 gun SOL should be a nice start.

    Click image for larger version. 

Name:	100_6695.jpg 
Views:	111 
Size:	159.9 KB 
ID:	277845Click image for larger version. 

Name:	100_6699.jpg 
Views:	115 
Size:	199.2 KB 
ID:	277846Click image for larger version. 

Name:	100_6704.jpg 
Views:	117 
Size:	299.6 KB 
ID:	277847

  4. #54

    Default

    Nice!

    Naturally, I prefer your ships as they are now, ie with NO SAILS!!!!!

  5. #55

    Default

    Top-notch Ken.

  6. #56

    Default

    Roughing out a couple of Martian cylinders for Tripods and Triplanes - will likely use one in our gaming tomorrow at our monthly get-together. We recently had an oriental rug cleaned, and it came back from the cleaner rolled around this 4-inch-diameter/3-foot-long cardboard tube...talk about serendipity! I had already purchased a piece of 4-inch-diameter PVC drain pipe for the same purpose, but the cardboard one seemed easier to use in all respects. The first picture shows the tube with a Scarab next to it for size...

    Click image for larger version. 

Name:	IMG_2267.jpg 
Views:	111 
Size:	163.7 KB 
ID:	277858

    Here is the first 'buried' cylinder I cut from the tube...

    Click image for larger version. 

Name:	IMG_2268.jpg 
Views:	109 
Size:	168.5 KB 
ID:	277859

    ...and here's the second...

    Click image for larger version. 

Name:	IMG_2270.jpg 
Views:	111 
Size:	162.8 KB 
ID:	277860

    ...each a bit different in buried attitude. I plan on mounting them on bases and using papier mache to build up the dirt and cover the tubes so they have a roughened appearance described by Wells in TWOTW. I am toying with putting a battery-operated green light inside them so they have that otherworldly glow Wells describes, too, but we shall see how that goes. More pictures as things come together.

    All the best,
    Matt

    PS - Wells describes the cylinders as being 30 yards across. At 1/200 scale that's roughly 5.4 inches...but I think 4 inches is close enough to give a proper 'feel' to things - plus, things come in 4-inch measurements (I looked for 5-inch things and came up empty-handed)

  7. #57

    Default

    Now that's how you recycle things!

  8. #58

    Default

    Hmmm, it does make sense for the cylinders to be made out of containers used for shipping.

  9. #59

    Default

    Matt, those scarabs/cylinders are really well done!
    Last edited by malachi; 11-08-2019 at 09:07.

  10. #60

    Default

    Holy moley this thread.

  11. #61

    Default

    Great idea for those cylinders Matt. Always great to recycle something that would just be thrown away.

  12. #62

    Default

    Quote Originally Posted by rmarsh View Post
    Here's the finished Snoopy. I have been toying with the idea of giving him the firing arch of the Dh.2 because in the cartoon he fires like he's got a turret gun.
    Attachment 277739
    Nice Snoopy! Love your painting and the bullet holes!

  13. #63

    Default

    Nice idea for the Martians. Tim, concerning the sails, I NEED the rigging as those plastic masts are going to break real quick without support. Also as it is a combat game where the ships are under sail..Well gotta put em in. One thing I will do though is make sure they are curved. Seen a few on You Tube where they just glue the top to the spar and let em hang straight down, nope...looks too odd to me.

  14. #64

    Default

    Looking forward to those Cylinders Matt.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  15. #65

    Default

    Great idea for the cylinders Matt!

  16. #66

    Default

    Stylish idea for the cylinders Matt. Your prototype has me thinking about some scrap PVC.

  17. #67

    Default

    The Massacre of Mankind has a scene of the Martian city with numerous structures, valleys and cylinders . . . makes for a challenging play mat, toss in some red vine fabric mesh and a few tanks . . .

  18. #68

    Default

    Click image for larger version. 

Name:	20191104_133509.jpg 
Views:	99 
Size:	208.4 KB 
ID:	277863

    These strangely painted birds are taking a bath in paint remover, might survive to become a new squadron . . . not that I need another one.

  19. #69

    Default

    Out of the jar and onto the paint bench . . . now for the colors . . .

    Click image for larger version. 

Name:	20191109_224847.jpg 
Views:	83 
Size:	101.9 KB 
ID:	277896

    12 hours in acetone . . . scary, but ok . . .

    Click image for larger version. 

Name:	20191109_224919.jpg 
Views:	85 
Size:	83.8 KB 
ID:	277897
    Last edited by Flying Officer Kyte; 11-10-2019 at 02:57. Reason: Orientation correction.

  20. #70

    Default

    Very nice - are you going to go for rigging on them? Personally I thought about it, then decided "life's too short" but the ones I have seen done are damned impressive

  21. #71

    Default

    From circus to serious. Nice transition David.

  22. #72

    Default

    Added to my Soccer War planes. First up 2 more Salvadorian P-51's.
    Click image for larger version. 

Name:	IMG_8555.jpg 
Views:	74 
Size:	71.3 KB 
ID:	277924

    Click image for larger version. 

Name:	IMG_8556.jpg 
Views:	74 
Size:	60.7 KB 
ID:	277925

    Click image for larger version. 

Name:	IMG_8557.jpg 
Views:	74 
Size:	60.7 KB 
ID:	277926

  23. #73

    Default

    Hmmm don't have any of these Caudron G4 hydroplanes as I recall . . . might need to fix this . . .

    Click image for larger version. 

Name:	20191111_120324.jpg 
Views:	64 
Size:	194.1 KB 
ID:	277952

  24. #74

    Default

    Right on Dave.
    Every home should have one.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  25. #75

    Default

    Okay then, here we go! Off with the wheels . . .

    Click image for larger version. 

Name:	20191111_140906.jpg 
Views:	60 
Size:	121.4 KB 
ID:	277955

    Carve the floats . . .

    Click image for larger version. 

Name:	20191111_141807.jpg 
Views:	60 
Size:	68.9 KB 
ID:	277959

    Glue 'em on!

    Click image for larger version. 

Name:	20191111_140453.jpg 
Views:	60 
Size:	140.0 KB 
ID:	277956

    Click image for larger version. 

Name:	20191111_140517.jpg 
Views:	60 
Size:	86.6 KB 
ID:	277957

    Can't forget the tail floats!

    Click image for larger version. 

Name:	20191111_140529.jpg 
Views:	61 
Size:	93.0 KB 
ID:	277958

    All better, we have at least one now, whew!

    Click image for larger version. 

Name:	20191111_140505.jpg 
Views:	60 
Size:	132.2 KB 
ID:	277960

  26. #76

    Default

    Just to show I've been working at something else other than my Western town here are a couple of E111's I built from the Valom kits to use in one of the games that we played over the long weekend.

    Click image for larger version. 

Name:	P1430456aa 800.jpg 
Views:	52 
Size:	44.9 KB 
ID:	277962
    Sorry this is a bit trixi with photoshopping out the stands.

    Click image for larger version. 

Name:	P1430460 800.jpg 
Views:	51 
Size:	32.4 KB 
ID:	277963

    Click image for larger version. 

Name:	P1430463 800.jpg 
Views:	51 
Size:	36.7 KB 
ID:	277964

    The 1st plane is obviously Udet and the 2nd is from this card and I don't know who made it, so sorry for not being able to give them credit.

    Click image for larger version. 

Name:	Fokker EIV fc-foe4-hkm-1_8xm 700.jpg 
Views:	51 
Size:	78.2 KB 
ID:	277965

    Cheers
    Last edited by Vagabond; Yesterday at 04:54.

  27. #77

    Default

    Very very nice.

  28. #78

    Default

    Love the planes. Nice work.

  29. #79

    Default

    Quote Originally Posted by clipper1801 View Post
    Today we finished the bulk build, 4 Pfalz D.Viii, 2 SSW D.lll, and a lone Fokker E.lll . . . All from Hunter's Shapeways bin.

    Attachment 277726

    Attachment 277727

    Attachment 277728

    Attachment 277729

    Attachment 277730



    Attachment 277731

    Attachment 277732

    Attachment 277733
    Love the planes. Nice work.

  30. #80

    Default

    Some amazing work going on here, as always. Love that Dolphin

  31. #81

    Default

    Very nice stuff. Love the planes in the air.

  32. #82

    Default

    So I did the Salvadorian P-51's. Now here is the last Honduran Corsair. Also added props ( from the Aerodrome store) to them. Corsair 609 is on one that was flown by a Capt Henriquez who shot down 2 P-51's and a Corsair.

    Click image for larger version. 

Name:	IMG_8559.jpg 
Views:	44 
Size:	58.3 KB 
ID:	277966

    Click image for larger version. 

Name:	IMG_8561.jpg 
Views:	44 
Size:	76.9 KB 
ID:	277967

  33. #83

    Default

    Finished the salvage operation, reclaimed 10 DR.I, ready for action!

    Click image for larger version. 

Name:	20191112_101035.jpg 
Views:	38 
Size:	161.7 KB 
ID:	278022

    Click image for larger version. 

Name:	20191112_101103.jpg 
Views:	38 
Size:	163.6 KB 
ID:	278023

    Click image for larger version. 

Name:	20191112_101121.jpg 
Views:	39 
Size:	179.3 KB 
ID:	278024

    Click image for larger version. 

Name:	20191112_101146.jpg 
Views:	39 
Size:	88.0 KB 
ID:	278025

    Click image for larger version. 

Name:	20191112_101205.jpg 
Views:	39 
Size:	94.3 KB 
ID:	278026

    Click image for larger version. 

Name:	20191112_101223.jpg 
Views:	39 
Size:	146.1 KB 
ID:	278027

    No official colors : (

  34. #84

    Default

    So I had 2 F86 Sabers I have been going to decal. Here they are.
    First up a ROC Saber. Their markings were pretty much the same as the USAF at that time.
    Click image for larger version. 

Name:	IMG_8564.jpg 
Views:	33 
Size:	61.5 KB 
ID:	278042

    Click image for larger version. 

Name:	IMG_8567.jpg 
Views:	34 
Size:	69.5 KB 
ID:	278043

    Then I decided to do the other one as a JSDAF. The markings are from different decal set I have from MISCMINI. Fuselage stripes are from a ZERO set and the tail markings are from the ANN set I have. Thought I would just do what I wanted on this one.

  35. #85

    Default

    Quote Originally Posted by BobP View Post
    Added to my Soccer War planes. First up 2 more Salvadorian P-51's.
    Click image for larger version. 

Name:	IMG_8555.jpg 
Views:	74 
Size:	71.3 KB 
ID:	277924

    Click image for larger version. 

Name:	IMG_8556.jpg 
Views:	74 
Size:	60.7 KB 
ID:	277925

    Click image for larger version. 

Name:	IMG_8557.jpg 
Views:	74 
Size:	60.7 KB 
ID:	277926
    Click image for larger version. 

Name:	WoG_P-51D_ElSalvDkGreenCard2S.jpg 
Views:	34 
Size:	224.7 KB 
ID:	278049
    Click image for larger version. 

Name:	WoG_P-51D_ElSalvLtGreenCard2S.jpg 
Views:	33 
Size:	223.7 KB 
ID:	278050
    Mike
    "Flying is learning to throw yourself at the ground and miss" Douglas Adams
    "Wings of Glory won't skin your elbows and knees while practicing." OldGuy59

  36. #86

    Default

    I was inspired by Matt's cylinder and started looking around at my supplies. Turns out I have some cardboard cylinders from vinyl so I mocked up the end pice on fusion 360.
    Click image for larger version. 

Name:	IMG_0495.jpg 
Views:	21 
Size:	65.4 KB 
ID:	278056
    Click image for larger version. 

Name:	Screen Shot 2019-11-13 at 12.52.28 PM.png 
Views:	19 
Size:	101.2 KB 
ID:	278057
    I'm thinking that a cool scenario for the cylinder would be to start with one tripod protecting the cylinder then add additional tripods in a set amount of turns to represent the time it takes for the Martians to build each unit. Squids could be built quicker and cuttlefish would take longer.

  37. #87

    Default

    Quote Originally Posted by rmarsh View Post
    I was inspired by Matt's cylinder and started looking around at my supplies. Turns out I have some cardboard cylinders from vinyl so I mocked up the end pice on fusion 360.
    Click image for larger version. 

Name:	IMG_0495.jpg 
Views:	21 
Size:	65.4 KB 
ID:	278056
    Click image for larger version. 

Name:	Screen Shot 2019-11-13 at 12.52.28 PM.png 
Views:	19 
Size:	101.2 KB 
ID:	278057
    I'm thinking that a cool scenario for the cylinder would be to start with one tripod protecting the cylinder then add additional tripods in a set amount of turns to represent the time it takes for the Martians to build each unit. Squids could be built quicker and cuttlefish would take longer.
    The end piece looks really cool. Would you be making it in two parts, for an end rim and open hatch?
    Mike
    "Flying is learning to throw yourself at the ground and miss" Douglas Adams
    "Wings of Glory won't skin your elbows and knees while practicing." OldGuy59

  38. #88

    Default

    I'm not making the prototype in two parts but that is a great Idea. I remember from reading the war of the worlds that the back unscrewed to open so maybe I'll make a threaded hatch.

  39. #89

    Default

    Robert, that end piece looks very cool. Will you be 3D printing your final design?

  40. #90

    Default

    This is looking great, Robert I look forward to seeing how this works out. And your scenario ideas sound great, too - pics of the game when you play it will be great to see...

    All the best,
    Matt

  41. #91

    Default

    The prototype just came off the printer and I have V2 with threads modeled.
    Click image for larger version. 

Name:	IMG_0496.jpg 
Views:	15 
Size:	71.4 KB 
ID:	278058
    Click image for larger version. 

Name:	Screen Shot 2019-11-13 at 2.29.19 PM.png 
Views:	16 
Size:	58.4 KB 
ID:	278059Click image for larger version. 

Name:	Screen Shot 2019-11-13 at 2.29.29 PM.png 
Views:	15 
Size:	64.0 KB 
ID:	278060

Page 2 of 2 FirstFirst 12


Similar Missions

  1. July 2019 Workbench
    By ShadowDragon in forum Hobby Room
    Replies: 100
    Last Post: 08-01-2019, 02:03
  2. May 2019 Workbench
    By clipper1801 in forum Hobby Room
    Replies: 189
    Last Post: 06-01-2019, 08:33
  3. What's on your November Workbench?
    By clipper1801 in forum Hobby Room
    Replies: 119
    Last Post: 11-30-2018, 22:16
  4. What's On Your Workbench for November 2015?
    By Пилот in forum Hobby Room
    Replies: 111
    Last Post: 11-30-2015, 05:16
  5. Whats on your workbench for November?
    By richard m schwab in forum Hobby Room
    Replies: 84
    Last Post: 11-30-2014, 19:50

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •