A little help required

[Rebel]

Hi All
I purchased three 1:200th scale Wellington Bombers earlier this year from a man who makes them (PM DanSam for details) while at Prague Con 2018 which (due to problems unstated) have only just arrived.
Now I have the problem of basing and finding suitable maneuver decks to use them.
The base I propose to use will be same size as the Mitchel B25 with suitable markings, not a great problem as RedVectors will produce anything I can give him a sketch of. My main problem is deciding what maneuver deck to use. Any guidance and suggestions would be most welcome.

[flash]

Not sure what it all means Reg but the WW2 stats show this for Wimpey's:

Vickers Wellington B Mk.III: Deck XB; guns:See gunnery arcs; Damage: 35; Ceiling: 7; Climb: 7; Base: HF; House Rules: 3
Vickers Wellington Mk.IC: Deck XA; guns:See gunnery arcs; Damage: 33; Ceiling: 7; Climb: 7; Base: HF; House Rules: 3

Base looks to be a Heavy Fighter - same as the Me110 ? But it's bigger than a Mitchell so that base size should do nicely if it's different.
No idea what the gunnery arcs are but the other gen is there & arcs should be easy to work out.
Hopefully someone can provide a management card.

[Jager]

Another error; I need to start making an errata again
Yes, it should have a bomber base.
Gunnery arcs are here: https://www.wingsofwar.org/forums/do...o=file&id=2138
Other notes are here: https://www.wingsofwar.org/forums/do...o=file&id=2137

Karl

[Rebel]

Thanks Dave and Karl! Very useful info.

[BobP]

Here in the store looks like you can build a base. I haven't tried but you want to look there.