Ares Games
Results 1 to 31 of 31

Thread: First test of a new stand idea

  1. #1

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default First test of a new stand idea

    I famously don't like the slender WoW/Wings of Glory stands as (to my mind) they are too thin and bend too much at higher altitudes.

    This is a first test using Wilkinsons department store Lego-style 'Wilko blocks' and a Litko WoW stand. The stand has the same markings as a WoW stand and the green brick (ground level) has been superglued on.

    The ball joint is a rare-earth magnet and a ball-bearing on a cut down WoW acrylic peg to match the pin under the plane. Care had to be taken with drilling out the WoW peg as the first one melted onto the drill bit despite only being 12v. I eventually dipped the drill bit in water every few seconds to cool it and lubricate the cut. The bricks have all been 'eased' with a power drill and the back edge of a knife as they stuck together too well.

    The aircraft is a DH4 and it is 'flying' at 10,000 feet being eight blue bricks and two red ones. The red ones are inserted at 5,000 foot levels as a playing aid. The white brick contains the magnet and has no height value. I chose white as it looks like a cloud! If this succeeds I may rub the blue bricks with a gentle abrasive and re-spray them with a lighter blue car paint, probably about the same colour as the Roland CII.

    Barry

    Name:  a3.jpg
Views: 429
Size:  125.0 KB
    Last edited by 'Warspite'; 08-23-2017 at 09:54. Reason: spelling error 'Doh!'

  2. #2

    Default

    Boy, if you can get these in clear......
    Karl
    It is impossible for a man to begin to learn what he thinks he knows. -- Epictetus

  3. #3

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Quote Originally Posted by Jager View Post
    Boy, if you can get these in clear......
    Karl
    I must admit my first thought was clear Lego but the cost per brick is prohibitive in the UK. These Wilko blocks are about £3.50 for a hundred or so, the last time I checked single Lego 2x2 pin bricks they were nearly 5 bricks for a pound!
    So you can see why I went with Wilko. Early tests suggest the bricks are stable to 20 high - which is 20,000 feet in my rules.

    Barry
    Last edited by 'Warspite'; 08-23-2017 at 13:13. Reason: grammar error

  4. #4

    Default

    Never mind the stands go the whole hog...

    Name:  download.jpg
Views: 398
Size:  10.9 KB

    Never Knowingly Undergunned !!

  5. #5

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    You can model battle damage with this one!


    Quote Originally Posted by Hedeby View Post
    Never mind the stands go the whole hog...

    Name:  download.jpg
Views: 398
Size:  10.9 KB

  6. #6

    Default

    Nice idea. Solid base and for those that use altitude the different colors show the altitude.

  7. #7

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Exactly the idea. TY!

    Quote Originally Posted by BobP View Post
    Nice idea. Solid base and for those that use altitude the different colors show the altitude.

  8. #8

    Default

    Very creative, Barry!

  9. #9

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Thank you.

    Quote Originally Posted by Naharaht View Post
    Very creative, Barry!

  10. #10

    Default

    This isn't a joke?
    Voilą le soleil d'Austerlitz!

  11. #11

    Smile

    Quote Originally Posted by Marechallannes View Post
    This isn't a joke?
    Yeah it does not add to the ambience of the Game in my opinion.
    However what ever "Floats your Boat"!

  12. #12

    Default

    I can't look at those extending metal poles without them becoming all I see.

    If these brick stands work for you, then great! I'll pass, though.
    I laugh in the face of danger - then I hide until it goes away!

  13. #13

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    As explained in the lead post, I find the clear plastic poles supplied with the game very poor as they bend and become unstable at height. I want to take games up to 18-20,000 feet using one section per 1,000 foot of real altitude. Experiments with 18 to 20 clear poles have not come out well so far. The bricks are individually shorter and being 2x2 pins are quite stable up to 20 bricks. The test aeroplane pictured is the heaviest two-seater I could find quickly. The ball joint allows it to bank its wings during turns, go nose-up during climbs and nose-down during dives.

    My eventual plan (watch this space) is to trial the old Harold Wood Wargamers rules which worked differently to WoW/WoG by allowing pilots to 'steer' onto target just as real pilots do rather than play guessing games. For this greater height is required for power dives, etc.

    Yes the colours are a bit brutal on the eye but I intend to tone down the blue with car spray when I get to regular play. As mentioned above clear Lego bricks might be aesthetically more pleasing but they are hideously expensive. This is strictly first sight of my test rig.

    I am not suggesting that others copy this practice, I am merely offering it as an option that other might wish to explore if they also find the game poles less than satisfactory.

    Barry





    Quote Originally Posted by Marechallannes View Post
    This isn't a joke?

  14. #14

    Default

    Hm, at first, I was kind of "why bother?" I do see your point, though with the higher altitudes being more than a little unstable.

    And your advice about the drill bit heat is a good heads-up for those of us who might want to try this ourselves. That also helped bring me around.

  15. #15

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    I have a 12v minicraft drill. I use it to drill out the hands of whitemetal figures to add wire/pin spears and also to drill plastics. With both whitemetal and the clear acrylic of the stands I have found melting to be a major problem. Indeed a whitemetal 15mm figure can become so hot it cannot be held with a bare hand. I now use pliers, a bulldog clip or a glove to hold them.

    With the acrylic the clear plastic went to mush and struck all over the small twist drill and had to be cut off using a craft knife with a 'whittling' action. Luckily I saved the drill bit. In both cases I have found having a small pot of cold water standing by and just dipping the drill bit into the water while it is spinning is enough to cool the bit. Dip it every ten seconds or so and don't be afraid to dip the piece as well. Finally do not exert too much pressure on the drill as that seems to raise the heat due to increased friction. Dip and gently let it cut a little, remove from the hole and dip again. Just repeat the process. Time consuming but ultimately successful!

    Barry



    Quote Originally Posted by zenlizard View Post
    Hm, at first, I was kind of "why bother?" I do see your point, though with the higher altitudes being more than a little unstable.

    And your advice about the drill bit heat is a good heads-up for those of us who might want to try this ourselves. That also helped bring me around.
    Last edited by 'Warspite'; 08-24-2017 at 08:25. Reason: spelling errors

  16. #16

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Additional idea:

    Looking at my own photo I suddenly realised that each player's brick pylon could also have white bricks inserted into it to imitate cloud levels.
    Say the umpire says there is a layer of 7/10s cloud at 8000 to 10,000 feet, those three bricks could be replaced by white bricks. While in that layer aircraft only have a 30% chance of spotting each other on each move. Say a roll of 71 to 100 on a set of percentage dice!

    Barry
    Last edited by 'Warspite'; 08-24-2017 at 10:28. Reason: I can't count!

  17. #17

    Default

    It might work and I agree it will be a lot steadier than the pegs, but for me, what it gains in practicality it loses in the aesthetic. The pegs at least give a semblance of the plane flying, alas the lego does not.
    But each to their own.

    Never Knowingly Undergunned !!

  18. #18

    Default

    Quote Originally Posted by Hedeby View Post
    The pegs at least give a semblance of the plane flying, alas the lego does not.
    But each to their own.
    https://www.bricklink.com/catalogIte...olorID=12&in=A

    ;)

  19. #19

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Interesting. After starting this thread I went to the UK site and the transparent 2x2 brick which I remember seeing several years ago has disappeared. Many other colours are available but the clear was not. Your site (below) appears to be US as it mentions US stores and appears to indicate that the brick is still available in the US at least.



  20. #20

    Default

    In Lego 2x2 round bricks in clear should be readily available. Also 2x2 square bricks the medium blue color of the Roland C.II exist. See the bricklink website mentioned earlier.
    So how many books are in your personal library?

  21. #21

    Default

    This shop has some clear circular 2x2 Lego bricks at 19p each. If the cross in the centre is a hole perhaps an aircraft peg would fit into it.

    https://shop.lego.com/en-GB/Pick-A-Brick-11998

  22. #22

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    That is the same site which I previously checked. The 2x2s are at pages 13,14, and 15. There are no clear ones. The cost is now slightly less than 5 for a £, nearer 7 for a £.

    The only apparent clears are in the 1x2 and specialist areas. Also if you pull the colour choice list down on the front page, clear does not appear as a choice at all. Very odd!

    Barry

    EDIT: I also just did an ebay search for part 3003 clear and it does not show up on any sellers' site. Various colours are available but the only clear Lego is specialist or 'wall panel' parts.




    Quote Originally Posted by Naharaht View Post
    This shop has some clear circular 2x2 Lego bricks at 19p each. If the cross in the centre is a hole perhaps an aircraft peg would fit into it.

    https://shop.lego.com/en-GB/Pick-A-Brick-11998
    Last edited by 'Warspite'; 08-26-2017 at 01:16. Reason: Added a paragraph

  23. #23

    Default

    There is a colour option labelled 'Transparent', Barry.

  24. #24

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Doh! It is early in the morning here!
    What's the time difference between your and I ?

    Quote Originally Posted by Naharaht View Post
    There is a colour option labelled 'Transparent', Barry.

  25. #25

    Default

    No time difference at all, Barry.

  26. #26

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    I was kidding to try and excuse my jet lag….

    Barry

    Quote Originally Posted by Naharaht View Post
    No time difference at all, Barry.

  27. #27

  28. #28

    Horse4261's Avatar
    Users Country Flag


    Name
    Troy
    Location
    Virginia, USA
    Sorties Flown
    135
    Join Date
    Sep 2009

    Default

    Have you considered using the larger 'balloon/bomber' pegs for use with your scout aircraft? I found that four of the regular height pegs, both scout and balloon/bomber, are equal to one of the extra long pegs that came with my balloon minis. I have permanently glued all my shorter pegs into four unit sections to represent a single height unit. I then painted them Light Blue with a thin red strip at the top of each section for quick visual altitude checking. The thicker balloon/bomber pegs will grant extra stability that you might be looking for and retain the aesthetic qualities many are seeking.

  29. #29

    'Warspite''s Avatar
    Users Country Flag


    Blog Entries
    4
    Name
    Barry
    Location
    north west Norfolk
    Sorties Flown
    760
    Join Date
    Apr 2013

    Default

    Quote Originally Posted by Horse4261 View Post
    Have you considered using the larger 'balloon/bomber' pegs for use with your scout aircraft? I found that four of the regular height pegs, both scout and balloon/bomber, are equal to one of the extra long pegs that came with my balloon minis. I have permanently glued all my shorter pegs into four unit sections to represent a single height unit. I then painted them Light Blue with a thin red strip at the top of each section for quick visual altitude checking. The thicker balloon/bomber pegs will grant extra stability that you might be looking for and retain the aesthetic qualities many are seeking.

    Hmmmmm….. interesting!

    Barry

  30. #30

    Default

    Quote Originally Posted by 'Warspite' View Post
    The only apparent clears are in the 1x2 and specialist areas. Also if you pull the colour choice list down on the front page, clear does not appear as a choice at all. Very odd!.
    Have you thought of using single round pegs Barry ? They do a round brick 1 - TR (light blue, or blue transparent as well as just tr) that may do the job, you could stick them together too. Cost 6p each
    https://shop.lego.com/en-GB/Pick-A-Brick-11998 ,or, https://shop.lego.com/en-GB/Pick-A-Brick-11998, or, https://shop.lego.com/en-GB/Pick-A-Brick-11998.
    Here's the blue one:

    "He is wise who watches"

  31. #31

    Default

    Quote Originally Posted by flash View Post
    Have you thought of using single round pegs Barry ? They do a round brick 1 - TR (light blue, or blue transparent as well as just tr) that may do the job, you could stick them together too. Cost 6p each
    https://shop.lego.com/en-GB/Pick-A-Brick-11998 ,or, https://shop.lego.com/en-GB/Pick-A-Brick-11998, or, https://shop.lego.com/en-GB/Pick-A-Brick-11998.
    Here's the blue one:
    Long experience with LEGO bricks says: They will wobble, and fall apart, without some sort of support through the center. The 2x2 provides the necessary stability.



Similar Missions

  1. STAND BY STAND BY WMMS 2017
    By Maverick in forum UK Wing
    Replies: 27
    Last Post: 03-13-2017, 15:20
  2. What does the SPA stand for?
    By redleif in forum WGF: Historical Discussions
    Replies: 4
    Last Post: 06-02-2014, 10:20
  3. WGF Need a stand for Gotha V
    By skyking20 in forum Sale/Trade/Wanted Classifieds
    Replies: 5
    Last Post: 01-08-2014, 07:48
  4. Baltimore-Washington Stand by for take off!
    By Albert Ross in forum US Wing
    Replies: 10
    Last Post: 08-08-2013, 14:25
  5. MacKay's Last Stand
    By diceslinger in forum WGF: After Action Reports
    Replies: 10
    Last Post: 02-08-2013, 03:37

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •