Page 2 of 2 FirstFirst 12
Results 51 to 89 of 89

Thread: Official Rumpler C Types Painting Thread

  1. #51

    Northern Command Squadron Leader.
    Colonel

    Users Country Flag


    Blog Entries
    10
    Name
    Neil
    Location
    Northumberland
    Sorties Flown
    11,676
    Join Date
    Jan 2013

    Default

    Well now it has teeth I may go looking for more balloons.
    See you on the Dark Side......

  2. #52

    Default

    Neil,
    You asked for this, and then, make me really work for it. What Jasta and crew?

    Click image for larger version. 

Name:	WWF Rumpler CI JastaX.png 
Views:	161 
Size:	714.8 KB 
ID:	140328
    Mike
    "Flying is learning to throw yourself at the ground and miss" Douglas Adams
    "Wings of Glory won't skin your elbows and knees while practicing." OldGuy59

  3. #53

    Northern Command Squadron Leader.
    Colonel

    Users Country Flag


    Blog Entries
    10
    Name
    Neil
    Location
    Northumberland
    Sorties Flown
    11,676
    Join Date
    Jan 2013

    Default

    Found out it belongs to Marine Flieger Abteilung 1 or 2 (MFA 1 - MFA 2), naval pilots!

    I'll go for Marine Flieger Abteilung 1, pilot/obs unknown.

    Aviatic Should be: Staffel 7, KAGOHL 2 (again pilot/obs unknown)

    Neil
    See you on the Dark Side......

  4. #54

    Northern Command Squadron Leader.
    Colonel

    Users Country Flag


    Blog Entries
    10
    Name
    Neil
    Location
    Northumberland
    Sorties Flown
    11,676
    Join Date
    Jan 2013

    Default

    Mike emailed pic of aviatic CI to you.
    See you on the Dark Side......

  5. #55

    Default

    KK,

    Updated the above card:
    Click image for larger version. 

Name:	WWF Rumpler CI MFFA1.png 
Views:	152 
Size:	711.3 KB 
ID:	140463
    Marine-Feldflieger-Abteilung (MFFA) - naval field flying squadron
    Source: www.overthefront.com - Austro-Hungarian /German Abbreviations

    See the Aviatik thread for your other one.
    Mike
    "Flying is learning to throw yourself at the ground and miss" Douglas Adams
    "Wings of Glory won't skin your elbows and knees while practicing." OldGuy59

  6. #56

    Northern Command Squadron Leader.
    Colonel

    Users Country Flag


    Blog Entries
    10
    Name
    Neil
    Location
    Northumberland
    Sorties Flown
    11,676
    Join Date
    Jan 2013

    Default

    Brilliant Mike, pure brilliance.
    See you on the Dark Side......

  7. #57

    Default

    Finally got some pilots and gunners into my planes.

    Click image for larger version. 

Name:	RumplerCIa.jpg 
Views:	142 
Size:	63.5 KB 
ID:	140512

    Click image for larger version. 

Name:	RumplerCIb.jpg 
Views:	144 
Size:	74.1 KB 
ID:	140513

    Here's looking up the barrel of the observer/gunner.
    Click image for larger version. 

Name:	RumplerCIc.jpg 
Views:	144 
Size:	81.0 KB 
ID:	140514

    Click image for larger version. 

Name:	RumplerCIe.jpg 
Views:	142 
Size:	65.6 KB 
ID:	140515

  8. #58

    Default

    Outstanding Peter!

  9. #59

    Default

    Whilst I'm very impressed with your work Peter, I have no wish to look up the barrel of your rear gunner if you don't mind old chap!
    Kyte.
    "Courage is the art of being the only one who knows you're scared to death."

  10. #60

    Default

    Super stuff, Peter! I really must bite the bullet, and try to do some pilots and gunners for my "ghost" planes.

  11. #61

    Default

    I think its worth the effort. I have been too lax in getting my planes their pilots and gunners. I hope to stick with it and won't consider any future planes done until they are occupied... that means I better get some more pilots in the near future as there are many more planes in the works.

    I'm almost tempted to remove the blob from the ARES planes and put in a Peter Pig pilot. Almost. I do paint them to try to give them a better look.

  12. #62

    Default

    Very fast Rumpler C.I, she's been sat on the workbench since August and with the 3 day weekend and being on Taxi duty I thought I'd get some work done in between other projects.

    Click image for larger version. 

Name:	DSC_1002[1].jpg 
Views:	127 
Size:	135.1 KB 
ID:	147829

    Click image for larger version. 

Name:	DSC_1004[1].jpg 
Views:	127 
Size:	123.6 KB 
ID:	147830

    Click image for larger version. 

Name:	DSC_1005[1].jpg 
Views:	127 
Size:	114.9 KB 
ID:	147831

  13. #63

    Default

    Nice looking bus James.
    |'m currently striving to complete a load of half finished projects.
    Did a bit of work this morning on a Pup that has been hanging around for about six months.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  14. #64

    Default

    Quote Originally Posted by Flying Officer Kyte View Post
    Nice looking bus James.
    |'m currently striving to complete a load of half finished projects.
    Did a bit of work this morning on a Pup that has been hanging around for about six months.
    Rob.
    Thanks Rob,

    My productivity came to a screeching halt though when first off I discovered I do not have any of the correct sized RAF roundels for the DH.2's and second I dropped one of the said DH.2's and shattered the right lower pylon!

    Fortunately with a bit of sprew and super glue I was able to rebuild her....... just need to find the right sized roundels and repaint the damaged pylon.

  15. #65

    Default

    Lovely plane James!
    I'm still battling through my "Fokker Frenzy!" at the moment, but have just been distracted into the Wild West - my Rumplers will have to wait a bit longer.............

  16. #66

    Default

    One thing I forgot to mention is the Japanese "Mystery" product I used to coat the Shapeways model....... You can see on the up wing surface and the fuselage where the finish is silky smooth while the lower wing only got a slight coating, yet holds the paint perfectly without soaking it all up.

    The next Shapeways will get 2 coating of this stuff..... I still need to find out the western name for it as it's brilliant for metal, porous plastics and coating your fingers in.

  17. #67

    Default

    Quote Originally Posted by FarEast View Post
    One thing I forgot to mention is the Japanese "Mystery" product I used to coat the Shapeways model....... You can see on the up wing surface and the fuselage where the finish is silky smooth while the lower wing only got a slight coating, yet holds the paint perfectly without soaking it all up.

    The next Shapeways will get 2 coating of this stuff..... I still need to find out the western name for it as it's brilliant for metal, porous plastics and coating your fingers in.
    Sounds just like the thing I could do with James. I have not found the floor sealant much good.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  18. #68

    Default

    Quote Originally Posted by FarEast View Post
    One thing I forgot to mention is the Japanese "Mystery" product I used to coat the Shapeways model....... You can see on the up wing surface and the fuselage where the finish is silky smooth while the lower wing only got a slight coating, yet holds the paint perfectly without soaking it all up.

    The next Shapeways will get 2 coating of this stuff..... I still need to find out the western name for it as it's brilliant for metal, porous plastics and coating your fingers in.
    Yes, we are all waiting for the 'Mystery' product to solve our Shapeways woes, and coat your fingers some more!

  19. #69

    Default

    Quote Originally Posted by FarEast View Post
    One thing I forgot to mention is the Japanese "Mystery" product I used to coat the Shapeways model....... You can see on the up wing surface and the fuselage where the finish is silky smooth while the lower wing only got a slight coating, yet holds the paint perfectly without soaking it all up.

    The next Shapeways will get 2 coating of this stuff..... I still need to find out the western name for it as it's brilliant for metal, porous plastics and coating your fingers in.
    Yes, curious to know what the product is.....great work on the yellow bird as well.

  20. #70

    Northern Command Squadron Leader.
    Colonel

    Users Country Flag


    Blog Entries
    10
    Name
    Neil
    Location
    Northumberland
    Sorties Flown
    11,676
    Join Date
    Jan 2013

    Default

    Found 3 coats of watered down PVA glue works a treat.
    See you on the Dark Side......

  21. #71

    Default

    Quote Originally Posted by Skafloc View Post
    Found 3 coats of watered down PVA glue works a treat.
    Now that sounds like an easy solution Neil.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  22. #72

    Default

    This was a hard thread to find, these planes are obviously not as sexy as Dr1's etc and it was down on page 9, as C I mine are Valom Rumpler C IV's so I hope they are OK here.

    I've had these completed for a while apart from the fact I couldn't decide on the tail. In the end I went for white rather than the camouflage colours the rest of the plane is painted in so that it would stand out nicely. By that time I'd used the tail decals on two other planes and so had to go with a straight cross rather than the Maltese cross, can I get away with this or should I paint a Maltese Cross on the tail?

    I wanted them to appear to be from the same unit and so I went with Decals I had, rather than the ones in the box which are from different units, the planes are Roter Hund (Red Dog) and Schwarzer Hund (Black Dog). Apparently these decals are Space Marines or some such, I didn't know that or I would have done something different..

    I mixed and used the colours as Valom’s instructions but the plane cards I've seen and the Nexus planes are a much brighter green and violet/purple – any thoughts appreciated, I've also done a silk varnish, which looks nice on the table but shines a bit when photographed.

    Final thank you to Flying Helmet for the suggestions on the background.

    Click image for larger version. 

Name:	P1400388 800.jpg 
Views:	87 
Size:	118.9 KB 
ID:	255362

    Click image for larger version. 

Name:	P1400390 800.jpg 
Views:	86 
Size:	113.2 KB 
ID:	255363

    Click image for larger version. 

Name:	P1400392 800.jpg 
Views:	85 
Size:	136.6 KB 
ID:	255364

    Any thoughts for improvements are more than welcome.
    Cheers

  23. #73

    Default

    They look fine to me John. The straight crosses look good on the tail. Could be just in the change from one to the other and the ground crew are a bit late changing over. Other than that I can probably find you a few crosses if it really bothers you.

    Thanks for posting.
    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  24. #74

    Default

    Nice pair of Rumplers.

    I think, it's not a problem that the colours vary a little bit.

    Quote Originally Posted by Vagabond View Post
    Final thank you to Flying Helmet..
    Who is this?

    The "No-Sails-Guy"?
    Voilą le soleil d'Austerlitz!

  25. #75

    Default

    Quote Originally Posted by Vagabond View Post
    This was a hard thread to find, these planes are obviously not as sexy as Dr1's etc and it was down on page 9,....
    Well you could have used the index and linked direct to it John .... Sticky thread, top of sub forum, in capitals, much easier... just saying
    There actually isn't a Rumpler C.IV thread as yet so you could have started one but I will change the title of this one to 'Rumpler C types' as a catch all. If you want to create a Rumpler C.IV thread go for it & I will re-title this back to C.I
    Last edited by flash; 09-28-2018 at 12:35.

    "He is wise who watches"

  26. #76

    Default

    Quote Originally Posted by flash View Post
    Well you could have used the index and linked direct to it John .... Sticky thread, top of sub forum, in capitals, much easier... just saying
    There actually isn't a Rumpler C.IV thread as yet so you could have started one but I will change the title of this one to 'Rumpler C types' as a catch all. If you want to create a Rumpler C.IV thread go for it & I will re-title this back to C.I
    CAPITALS you say, top of the page you say, a sticky you say, why didn't I see that then. It should be in bold, flashing, red lettering, so that those of us who are visually challenged can see it.

    Thanks for letting me know Dave, it will make the job easier if and when I get the next planes finished, but as they are sexy Fokker VII's the thread will be on page 1.
    As the previous post was 2014 I don't think you have to worry about the need for a new thread on C.IV's

    Sven, yep I think you might have the right chap there.

    Rob I do need to get some roundels and crosses to finish off other planes, but thanks for the offer, the straight crosses on the tail niggle a bit, but I can live with it for a while, which probably means forever.

    Cheers

  27. #77

    Default

    Maybe it's just me, but I think Rumplers are sexy too.

  28. #78

    Default

    Great job, John. Hope to see them in action some day.

  29. #79

    Default

    Quote Originally Posted by ReducedAirFact View Post
    Maybe it's just me, but I think Rumplers are sexy too.
    Huumm I'm not sure what to say to that Daryl

    Mind you, I think so too.

  30. #80

    Default

    Quote Originally Posted by Stumptonian View Post
    Great job, John. Hope to see them in action some day.
    Cheers Pete, I could always bring them over to Oregon There's a very nice chap who follows my blog, who's also from Oregon, you must know him, there can't be many wargamers there, we could all meet up.


  31. #81

    Default

    Afraid I don't know any wargamers here.
    Left them all behind in BC when I moved here in 2000.

    Your comment reminds me of some we used to get up in Canada.
    "Oh you must know so-and-so. He lives in Winnipeg. Perhaps you could meet up."
    Only 1400 miles (2300km) away.

  32. #82

    Default

    Quote Originally Posted by Stumptonian View Post
    Afraid I don't know any wargamers here.
    Left them all behind in BC when I moved here in 2000.

    Your comment reminds me of some we used to get up in Canada.
    "Oh you must know so-and-so. He lives in Winnipeg. Perhaps you could meet up."
    Only 1400 miles (2300km) away.
    I was only joking, I know you have huge distances to cover. My nearest wargaming club is a 40 mile round trip and I think that is too far.

  33. #83

    Default

    Quote Originally Posted by Flying Helmut View Post
    Super stuff, Peter! I really must bite the bullet, and try to do some pilots and gunners for my "ghost" planes.
    6 (that's SIX years later ) I finally put a crew in my Rumpler C.I, and took the opportunity to give it a quick paint "refit" at the same time.

    Click image for larger version. 

Name:	Rumpler Refit (2).jpg 
Views:	30 
Size:	91.7 KB 
ID:	297693

    Click image for larger version. 

Name:	Rumpler Refit (3).jpg 
Views:	32 
Size:	88.2 KB 
ID:	297694

    Click image for larger version. 

Name:	Rumpler Refit (5).jpg 
Views:	33 
Size:	90.2 KB 
ID:	297695

    Click image for larger version. 

Name:	Rumpler Refit (6).jpg 
Views:	34 
Size:	86.8 KB 
ID:	297696

    Click image for larger version. 

Name:	Rumpler Refit (7).jpg 
Views:	33 
Size:	85.7 KB 
ID:	297697

    In addition to the crew figures:
    New ailerons, elevator demarcation, natural wooden prop, exhaust rust, exhaust smoke stain on upper wing, and clean-up of struts, wheel covers and paintwork mistakes.
    I laugh in the face of danger - then I hide until it goes away!

  34. #84

    Default

    Nice work Tim

    "He is wise who watches"

  35. #85

    Default

    Love it! Do you have a separate hangar where you store the collection?

  36. #86

    Default

    A very fine bird it is too Tim.
    The downside is that six years later and the war is over!

    Rob.
    "Courage is the art of being the only one who knows you're scared to death."

  37. #87

    Default

    Quote Originally Posted by Flying Officer Kyte View Post
    A very fine bird it is too Tim.
    The downside is that six years later and the war is over!

    Rob.
    There certainly seems to have been a 15 month Armistice...
    I laugh in the face of danger - then I hide until it goes away!

  38. #88

    Default

    The Pilot and Observer certainly improve the look of the planes, everytime I put my Rumplers on the table I know I should follow your example, but if it took you 6 years I still have 4 years to go.


  39. #89

    Default

    lol, did they refuse to get in the aircraft? court-marshall offence? nice C.I Tim

Page 2 of 2 FirstFirst 12


Similar Missions

  1. Official RAF BE 2a/b/c/d painting thread
    By 144sram in forum Painting Showcase
    Replies: 75
    Last Post: 09-14-2017, 03:51
  2. Official RE.8 painting thread
    By steel_ratt in forum Painting Showcase
    Replies: 21
    Last Post: 11-10-2015, 02:54
  3. Official D.H.5 Painting thread
    By Whiskysierra in forum Painting Showcase
    Replies: 13
    Last Post: 05-01-2013, 12:17
  4. Official Rumpler 6B Seaplane painting thread.
    By Flying Officer Kyte in forum Painting Showcase
    Replies: 3
    Last Post: 02-17-2013, 14:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •