I got into a discussion today with a friend from our gaming club.
It was in relation to Stacked Bombers and Fighters flying through them.
Currently the problem is that this would cause the bases to overlap and as such there would be collisions all over the place. However in reality aircraft did fly through stacked bombers and yes some collisions did happen but mostly they weaved their way through.
What we came up with was that if you relate Climb rate with metres climbed per Climb Counter.
Assuming that one Altitude peg represents 1000m (3250Ft)
Then an aircraft with a climb rate of 2 covers 500m per climb counter and an aircraft with a climb rate of 10 would climb 100m per climb counter.
See graph below


Now to reduce collisions and allow aircraft to pass though bomber stacks use the graph and calculate the altitude of the attacking aircraft by the number of climb counters and then calculate the altitude of the Bomber/s that the attacking aircrafts base overlaps. If the Altitudes are the same or within 50m then a collision has occurred. Follow standard collision rules. If the altitudes are over 50m apart then it is considered that the aircraft missed. That means no collision and therefore the aircraft can fire on each other or others.
Example 1
Fokker DVII Climb rate 2 with one climb counter is on 500m
HP 0/400 Climb rate 8 with 4 climb counters is on 500m
Therefore they collided
Example 2
Fokker DVII Climb rate 2 with one climb counter is on 500m
HP 0/400 Climb rate 8 with 5 climb counters is on 625m
Distance between aircraft is over 50m therefore no collision.

This assumes all aircraft have the same number of pegs.
It also allows bombers to be stacked within a peg altitude with bases overlapping. Formation flying.

I would like to know your thoughts on this
Linz