• Upcoming Releases

    To be confirmed.... WW1 Balloons due Q4 2022
  • Recent Poll

    DONCASTER 2023 SEPTEMBER DATES (Votes: 18)

    1. 1st, 2nd and 3rd September (Votes: 10)

    2. 29th, 30th Sept. and 1st October (Votes: 11)

  • Donations


    If you like our website and want to give something back, you can make a donation.

    Please select a preferred amount of the donation, and then click the poster image below.

    Donation Amount
  • How to make a Miniature of the Tank Mk

    You need:
    • printed parts of the tank
    • about 5x5 cm of cardboard 2mm thick
    • glue stick
    • scissors, cutter
    • a pin for gun barrels
    • pincers, flat file or sand paper
    • 1mm drill

    Step 1: Print the picture with the tank pieces in the size of 7,5 x 4,5 cm on the standard office paper (80 gr/m2)

    Step 2: Cut out the parts 1 and 4 and stick them on cardboard. Cut out the cardboard and stick the parts 2 and 3 to the opposite side and parts 5 to the edges.

    Step 3: Cut out the four pieces of the cardboard in the size of 5 x 7 mm and stick two and two together. Stick the parts 6 and 7 on it.

    Step 4: Cut out the three pieces of the cardboard in the size of the white section of the part 8. Stick them together. Stick the part 8 on it.

    Step 5: Cut two pieces of the pin and round the edges.

    Step 6: Stick all the parts together, drill holes in the side turrets and stick in the pieces of the pin.



    For use in game print the card by Max Headroom and simply place the miniature on it.

    For more photos see my gallery.
    This article was originally published in forum thread: How to make a Miniature of the Tank Mk started by Kubajs View original post