gully_raker
08-09-2011, 20:57
:salute: G'day All!
With all the discussion on Shapeways product I thought I would post some pics on the Triplane after undercoating & painting.
Still waiting for the Rondel Decals & I have a clear plastic disc to add for the Prop.
I just used the GW white spray undercoat, Vigelleo paint for the PC10 & GWs Bleached Bone for the CDL plus Snakebite Leather for struts & cockpit. The decals have been covered with GW Matt varnish & the Engine Cowling done with Gloss Varnish. Incidently the PC 10 is actually the same colour I used on the McCudden SE5a Repaint but these pics were taken on a dull day & the colour looks much darker than it actually is.
Still have to get a pilot as well.;)
Also attached is the Profile pic of the Aircraft I copied.:)20046200472004820049
With all the discussion on Shapeways product I thought I would post some pics on the Triplane after undercoating & painting.
Still waiting for the Rondel Decals & I have a clear plastic disc to add for the Prop.
I just used the GW white spray undercoat, Vigelleo paint for the PC10 & GWs Bleached Bone for the CDL plus Snakebite Leather for struts & cockpit. The decals have been covered with GW Matt varnish & the Engine Cowling done with Gloss Varnish. Incidently the PC 10 is actually the same colour I used on the McCudden SE5a Repaint but these pics were taken on a dull day & the colour looks much darker than it actually is.
Still have to get a pilot as well.;)
Also attached is the Profile pic of the Aircraft I copied.:)20046200472004820049